-
-
Huayan Selective Talk-Back Extension Type YDG-2F
$500.00 Add to cartHuayan Selective Talk-Back Extension Type YDG-2F
Edition 558-A
DC-24V
Protec IP 44
Date 2020-12
Weight 1.4 G
No. 20l0501624
-
-
Sale!
JRC DOPPLER LOG JLN-740N DISPLAY MODEL NWZ-4640
Original price was: $934.00.$801.00Current price is: $801.00. Add to cartJRC DOPPLER / SPEED LOG JLN 740 DISPLAY UNIT MODEL NWZ-4640
-
JRC JLR-7500 GPS NAVIGATION
$935.00 Add to cartDisplay 5.7-inch, white LED backlight, 320 by 240 pixels
Dimmer 4 stages (bright, middle, dark, off )
Power supply 10.8V to 31.2V DC <10 W
Serial data in/out output: 4 ch (IEC61162-1), input: 1 ch
Contact signal in/out output: 2 ch, input 1 ch
LAN built-in 10/100 Mpbs
Data backup display: flash ROM, sensor: SRAM with battery
Waypoint 10,000 points, event memory 1000 points, WPT name: 16 characters
Waypoint input LAT/LON, bearing/range, event, TD
WPT/route data transfer via LAN and RS-232C
Track/route 2000 points, 100 routes with 512 WPT per route
Plot scale 0.2, 0.5, 1.2, 5, 10, 20, 50, 100, 200, 300 NM
Plot interval 1 up to 60 min (1 sec) or 0.01 to 99.99 NM (0.01 NM)
Navigation calculation select Great Circle and Rhumb line for each leg (total distance up to 99,999 nm)
Screen mode LAT/LON, CDI (highway), trackplot, GPS sat. info, enter WPT/route planning, WPT info
Alarms arrival, anchor, boundary, XTD, no position fi x, speed, trip, 1) temperature, 1) depth, HDOP
Adjust magnetic variation auto or manual
Geodetic system 46 systems
Units NM/kn, km/kPh, mi/miPh, m, ft, fm, °C or °F -
-
KODEN KGP-915 GPS NAVIGATION
$604.00 Add to cartKoden KGP-915 GPS numeric keypad enables ease of use and simple waypoint entry. Common features include auto or manual compensation or magnetic variation, MOB button, alarms for Cross Track Error, Waypoint Proximity and Anchor Watch.
The Koden KGP-915 has the ability to convert the latitude and longitude display into Decca Lanes of Position (LOP’s). There is also the facility to enter a LOP correction for either the Red, Green or Purple lanes.
-
LINGLU ECHO SOUNDER DS-2018
Read moreLINGLU ECHO SOUNDER DS-2018
Category Characteristic Parameter Main Features Device Type Ultrasonic Marine echo sounder Measurement channels 2 Frequencies 200 kHz and 200 kHz Output power 400 W Measurement accuracy ≤ ±0.1 m or ±1% of the range Permission 0.1 m Minimum depth 0.3 m Maximum measuring range 800 m Operating speed of the vessel from 0 to 30 nodes Screen Size 10.4 inches Screen Resolution 800×600 pixels Signal strength 7 levels Data storage up to 24 hours I/O port Compatible with the NMEA0183 protocol Printer Port Compatible with RS-232 protocol Electrical characteristics Basic nutrition AC220V (±10%) / 50Hz (±10%) Additional meals DC24V (-25% ~ +30%) Power consumption <15 Вт Dimensions and weight Overall dimensions 279×278×69 mm Weight 2 kg Degree of protection IP display protection IP23 IP protection of the sensor IP68 Temperature and operating conditions Safety distance from compass >50 cm Operating temperature -15°C to +55°C Operating humidity 10% to 90% RH -
-
NAVITRON NT990 HDI TRUE HEADING DATA INTERFACE DIGITAL DISPLAY
$385.00 Add to cartBSH (Germany) type approved for AIS, ECDIS, Radar and Heading Repeater interfacing, the NT990HDI (Heading Data Interface) will convert virtually any Synchro or Step by Step heading input signal to heading data transmitted on 1 (NT990HDI/1) or 2 (NT990HDI/2) isolated NMEA 0183 output channels. The output channels may be independently set for IEC 61162/1 (4800 baud) or IEC 61162/2 (38400 baud).
A speed log giving 200 or 400 ppNm may also be connected to the NT990HDI to provide NMEA 0183 speed information to proprietary systems.
All inputs to the NT990HDI are Opto-Isolated to eliminate common mode and loading problems.
The NMEA 0183 output sentences may be set for heading only ($HEHDT), heading and Rate Of Turn ($HEROT), heading and speed ($VDVHW) or heading, rate of turn and speed.
Heading information is permanently displayed on a 4-digit LED display with variable intensity for night viewing whilst built in alarm functions triggered by internal monitors warn of heading input or NMEA output failure.
-
NEMIC-LAMDA EWS 600-24 POWER SUPPLY 24V 27 AMP
$303.00 Add to cartTDK-Lambda EWS600-24 Power Supply,AC-DC,24V,27A,85-132/170-265V In,Enclosed,Pnl Mnt,648W,EWS Series
-
NIPPON HAKUYO ODA1310-1N M MARINE AUTOMATIC TELEPHONE OKI
$449.00 Add to cartNIPPON HAKUYO ODA1310-1N M MARINE AUTOMATIC TELEPHONE
Nippon Hakuyo Oda1310-1N M Marine Automatic Telephone 21X29 Tkb-16
Mfr: Nippon Hakuyo Electronics. Ltd.
Shizuoka Oki Electric Co., Ltd.
Perimenis Electrical Services
Nhe
Mkk
Marine Telephone
Automatic Telephone (Wall Type)
Oda1310 Series
Model: Oda1310-1N M
Mfg.No: 202099
Model: Tkb-16
Code: 0600072000
2103
Product Name: Oda 1310-1N
Color: N7
Made In Japan
Weight: 1.340 Kg -
Sale!
NSR NGR-5000 GPS MARINE Multi-System GNSS NAVIGATOR
Original price was: $1,043.00.$989.00Current price is: $989.00. Add to cartNGR-5000 MARINE Multi-System GNSS NAVIGATOR
NSR’s new generation of IMO Multi-System GNSS:
– 7 inch color LCD, touch screen operation
– BDS, GPS, GLONASS, 3 in 1
– Port for INS connection
– Meet latest IEC61108-5 BDS standards
– Type approval with CCS Comprehensive navigation data displays.
Storage for up to 999 waypoints and 30 routes.
7 inch, color LCD, touch screen operation with adjustable brilliance.
Dedicate port for INS connection.
2 GNSS data outputs.
A DGNSS beacon receiver (external) may be connected to the NGR-5000 to add DGNSS function. -
Sale!
NTX 100B MARINE NAVTEX RECEIVER
Original price was: $670.00.$605.00Current price is: $605.00. Add to cartMARINE NAVTEX RECEIVER
MODEL : NXT100B
S/N B23220035
MFD 2023/11
NINGBOMCHIYANG ELECTRONIC CO.LTD.
WITH NAVTEX ANTENNA
MODEL : CY-ANT02
-
OBSERMET OMC-139 WIND DISPLAY 230 VAC
$648.00 Add to cartOBSERMET OMC-139 WIND DISPLAY 230 VAC (USED)
OBSERMET
OBSERVATOR INSTRUMENTS
TYPE: OMC-139
SERIAL NO : 13901317
WIND DISPLAY
SUPPLY VOLTAGE: 230 VAC
-
Sale!
OVERLAND UPC 5000P SERIAL LINE SPLITTER
Original price was: $456.00.$412.00Current price is: $412.00. Add to cartUPC 5000P Spesifications:
UPC 5000P is a serial line splitter
with two separate inputs and 15 outputs.
Dual power input with autoswitch.
Input A and B are separated.
input A is prioritized.
If there is data on
both input A and B, input A is used.
Input B is used only if input A is out.
The powersupply and both signal inputs are
galvanic isolated from the outputs.